SchwiftyThing
SchwiftyBogey
SchwiftyBogey
Couldn't load pickup availability
Connect up to four switches to the screw terminals and pair them with SchwiftyEA for wireless stage control of QLab or other show control software.
Offers a range of up to 1000 meters under optimal conditions.
Powered by a 3V CR2032 coin cell battery.
SchwiftyBogey — the stealthy way to hide up‑to‑four momentary buttons inside scenery, props, lecterns or interactive art pieces.
Slide your wire ends straight into the push‑in (“poke”) spring‑clamp terminals on the PCB, pair the Bogey with a SchwiftyEA receiver, and every tap is turned into a unique wireless MIDI note your show‑control software can react to.
Typical build ideas
Where to hide it | Button style | Example cue |
---|---|---|
In‑floor “GO” spots | Momentary foot pedal | Trigger next QLab scene |
Escape‑room secret panel | Leaf or reed switch | Play reveal sound + unlock door |
Lectern presenters | Illuminated arcade pushbutton | Toggle walk‑up music bed |
Prop rifle or wand | Sub‑mini tact switch | Fire lighting & smoke FX |
Quick specs
-
Inputs: 4 × 2‑pin push‑in spring‑clamp terminals, accepts 26‑20 AWG
-
Switch type: dry‑contact momentary (NO or NC)
-
Max cable run: ≈ 10 m shielded per input
-
RF range: up to 1000 m LOS (868MHz)
-
Power: 1 × CR2032, ~12 µA standby, ~15 mA TX (≈ 1 year typical)
-
Dimensions: 55 × 35 × 18 mm bare PCB
-
Weight: 25 g with battery
-
Mounting: two M3 through‑holes
Buttons are not included. Any dry‑contact momentary switch will work – from tiny tactiles to heavy‑duty stomp pedals.
Add your favourite momentary buttons, tap to pair, and you’re ready to trigger flawless cues from anywhere on (or off) the stage.


